国产做爰XXXⅩ高潮视频12p,熟女老阿V8888AV,91国產乱高潮白浆,色婷婷香蕉在线一区二区,日韩精品无码人妻一区二区三区

我的購物車
  • 進口熱水循環泵(歐美進口品牌)
  • 進口熱水循環泵(歐美進口品牌)

進口熱水循環泵(歐美進口品牌)

聯系該企業時請說明您是在《制冷名錄》看到該信息,以獲得更多的信任和更好的服務。
價格:12000.00/臺
進店看看>
上海秉奇閥門有限公司
  • 聯系人:黃天翔
  • 點擊獲取聯系方式
  • 地區:上海
產品分類
熱銷產品

英國GRIMM格林進口熱水循環泵 UK GRIMM Imported hot water circulating pump

英國GRIMM格林進口熱水循環泵概述: 
??  進口熱水循環泵系系臥式單級單吸蝸殼式離心泵,是英國格林引進國際先進技術,在國內du家生產制造的具有世界先進水平的產品,泵的性能參數、結構、安裝尺寸、主要零件材料和泵的技術要求等全部符合英國的技術要求和標準。
          進口熱水循環泵主要用于冶金、電站、輕紡、化工、采暖及余熱利用系統中的管路或封閉回路中的熱水循環或有機熱交換介質的輸送。對輸送熱交換介質的泵來說,介質與泵是處在高溫下,而系統壓力是不高的。

英國GRIMM格林進口熱水循環泵結構說明:
          GRS型泵為臥式徑向剖分,后開門,單級單吸蝸殼式離心泵。泵的連接尺寸按照ISO2858/DIN 24256,腳支撐式。
          GRSY、GRY為臥式,徑向剖分,后開門,單級單吸蝸殼式離心泵。泵連接尺寸按照ISO2858/DIN 24256,中心線支撐式。

英國GRIMM格林進口熱水循環泵性能特點:
1、軸封:可選配軟填料密封和機械密封。  
2、聯軸器:采用彈性柱梢聯軸器,傳動精度高。  
3、輔助管路:按API 610第8版要求配置。  
4、承壓:設計壓力為4.0MPa,承壓高。  
5、軸承:軸承選用圓柱滾子軸承與兩個角接觸軸承配套,采用稀油潤滑,承載能力顯著提高。軸承設計壽命25000小時。  
6、高效節能:采用CFD計算流體動力學,分析計算出泵內壓力分布和速度分布關系、優化泵的流道設計,確保泵有高效的水力形線,提高了泵的效率。  
7、耐高溫結構:泵體采用中心支撐方式,解決了泵在輸送高溫介質時防止高溫下泵組熱膨脹不一致而造成的應力集中以及聯軸器對中心發生改變。泵支架、泵蓋、懸架體(軸承部位)及機封壓蓋均有冷卻腔,可在不同溫度時分別用冷卻水冷卻或風冷卻。

英國GRIMM格林進口熱水循環泵技術參數: 
流量:3.8~1580m3/h
揚程:3~250m
口徑:32~300mm
轉速:1450~2900r/min
功率:2.2~450kw
介質溫度:≤280℃
工作壓力:≤4.0MPa

英國GRIMM格林進口熱水循環泵適用范圍: 
          適用于冶金、電站、輕紡、化工、采暖及余熱利用系統中的管路或封閉回路中的熱水循環。輸送280℃以下,不含顆粒的高溫水。

UK GRIMM Imported hot water circulating pump summary:

        Import Department of hot water circulating pump single stage single suction horizontal centrifugal pump is the British Green introduction of international advanced technology, in the exclusive domestic production of the world's advanced level products, performance parameters, pump structure, installation size, material of main parts and pump technical requirements are in conformity with the technical requirements of Britain and standard.

         Imported hot water circulating pump is mainly used in metallurgy, power plant, textile, chemical, heating and waste heat utilization system in the pipeline or closed loop hot water circulation or organic heat exchange medium transmission. To transport heat exchange medium pump, medium and pump is in high temperature, but system pressure is not high.

UK GRIMM Imported hot water circulating pump structure description:

       GRS pump is horizontal radial split, back door, single stage single suction volute centrifugal pump. Pump connection size according to ISO 2858 / DIN 24256, foot support type.

         GRSY and GRY are horizontal, radial split, back door, single stage single suction volute centrifugal pumps. Pump connection size according to ISO 2858 / DIN 24256, central line support type.

UK GRIMM Imported hot water circulating pump performance characteristics:

1.Shaft seal: optional with soft packing, sealing and mechanical seal.

2.Coupling: the use of elastic column pin coupling, high transmission accuracy.

3.Auxiliary pipe: according to API 610, Eighth Edition requirements configuration.

4.Pressure: design pressure of 4.0MPa, high pressure.

5.Bearings: Bearings selected cylindrical roller bearings and two angular contact bearings matching, the use of thin oil lubrication, bearing capacity improved significantly. Bearing design life 25000 hours.

6.High efficiency and energy saving: use CFD computational fluid dynamics to analyze and calculate the pressure distribution and velocity distribution in the pump, optimize the flow passage design of the pump, ensure the efficient hydraulic line of the pump, and improve the efficiency of the pump.

7.High temperature structure: pump body using the center support way, solve the pump in the transmission of high temperature medium, prevent high temperature under the pump group thermal expansion inconsistent stress concentration, and the coupling to the center change. Pump support, pump cover, suspension body (bearing parts) and machine seal gland have cooling chamber, can be used at different temperatures with cooling water cooling or wind cooling.

UK GRIMM Imported hot water circulating pump technical Parameters:

Flow rate: 3.8 ~ 1580m3/h

Lift: 3 ~ 250m

Caliber: 32 ~ 300mm

Speed: 1450 ~ 2900r/min

Power: 2.2 ~ 450KW

Medium temperature: less than or equal to 280 DEG C

Working pressure: 4.0MPa

UK GRIMM Imported hot water circulating pump scope of application:

        The utility model is suitable for hot water circulation in pipelines or closed circuits in metallurgy, power plants, light textile, chemical industry, heating and waste heat utilization systems. Deliver high temperature water without particles at 280 degrees centigrade.

好評度
{{GoodNumPer}}%
{{item.LabelTitle}}
  • 全部評價({{AppraiseStatistics.AllNum}})
  • 好評({{AppraiseStatistics.GoodNum}})
  • 中評({{AppraiseStatistics.MidNum}})
  • 差評({{AppraiseStatistics.BadNum}})
  • 曬圖
同類推薦
拍真实国产伦偷精品 | 成人午夜无码A片秀色直播 一级A片久久久免费直播间 | 无码窝视频在线观看17c | 麻斗传谋mv视频免费播放大全 | 国产精品久久久久久 | 免费A级毛片在线播放不收费换脸 | 国内精品久久久久久久 | 四色成人A片视频在线看 | 国产妇女野外牲一级毛片 | 国产精品海角社区在线 | 一级A婬片试看60分钟 | 52αv我爱aⅴ色吊丝丝 | av在线观看高清无码 | 摸BBB揉BBB揉BBB视频火 | 一区二区三区无码视频 | 欧美一区二区三区不卡区 | 91探花国产综合在线精品 | 精品火热分享久久一区二区 | 农村乱人妻一区二区三区 | 四川BBB搡BBB搡多人孕妇 | 丝袜秘书一区二区三区四区 | 亚洲一区二区三区三州 | 久久一区二区三区精品 | 素人美女被操到高潮完整版在线观看 | 欧美最爽乱婬A片黑人 | 少妇做爰免费视频播放 | 午夜精品视频久久久男女 | 国产又粗又猛又爽又黄的视频先 | 少妇特黄A一区二区三区 | 國產又黃又色又粗又大又長 | 老熟妇一区二区三区啪啪 | 午夜精品久久久久影院老司 | 国语对白老熟妇A片91 | 精品久久一区二区三区 | 人妻无码黑人又大又粗 | 国产三级三级三级看三级 | 久久久蜜桃亚洲一区自慰 | 黑人巨大精品欧美一区免费视频 | 日本无码A片人妻久尤物 | 妮可多酉群交一级毛片 | 91成人 在线观看喷潮 |